FCC MiniTT1 Transmitter for Nikon

$ 169.00

With its low profile design, you can use the MiniTT1 Transmitter on camera to trigger remote i-TTL / CLS speedlights or studio flashes attached to FlexTT5 Transceivers.

Place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.

This is an FCC frequency radio which can only ship to an address within the United States.  For anyone outside the US, please visit our Where to Buy page to find your favorite dealer.

Key Features:

Dedicated TTL Triggering

Manual Power Control

HyperSync

High Speed Sync (Auto FP)

USB Upgradeable

See details at the PocketWizard Wiki.

 

 

TTL Compatibility:

Nikon i-TTL

Frequency:

340.00 - 354.00 MHz US FCC / IC (North America)

Channels:

52 Channels over 26 Frequencies (FCC/IC)

Antenna:

Internal

Transmit output power:

Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)

Range Performance:

Up to 10 to 240 meters (30 to 800 feet) for E-TTL triggering.  Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference.

Mounting:

Hot Shoe only

Maximum Shooting Rate  Frames per second (fps)

TTL Mode:  within 1 FPS of camera's maximum FPS
Basic Trigger Mode: Camera Max FPS
* dependent on flash power settings 
FPS = Frames Per Second

Power / Channel Switch

OFF - C.2 - C.1

Status Indicator

LED: Green, Amber, Red status indications

Voltage Present

3.3 VDC (all pins) - safe for all cameras

Hot Shoe voltage protection:

Hot Shoe: up to 50V

USB

USB Compliant 2.0, Mini-B Connector

Operating Temperature

Above -15° C (5° F) and below 50° C (120° F)

Storage Temperature (without battery)

Above -30 C (-22 F) and below 85 C (185 F)

Construction

High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin

Power

3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type

Battery Life

30 - 50 hours of camera "awake time" depending on shooting habits

Dimensions

2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall


Weight

2.3 oz (65 grams); 2.0 oz (57 grams) without battery

Included in the box

MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide

ROHS Compliant

 

The MiniTT1 and FlexTT5 for Nikon are compatible with these modern Nikon digital cameras capable of using Nikon's latest i-TTL / CLS protocol:

* These cameras do not support HyperSync or HSS/FP-Sync operation: D5300, D5200, D5100, D5000, D3300, D3200, D3100, D3000, D40x, D40

The MiniTT1 & FlexTT5 for Nikon are compatible with the following modern Nikon Speedlights as Remote flashes and Nikon On-Camera Master flashes: (Other flashes may work in Basic Trigger Mode without CLS / i-TTL.)

Nikon Speedlights as Remotes

  • SB-910
  • SB-900
  • SB-800
  • SB-700
  • SB-600
  • SB-500
  • SB-400 (not capable of HSS)

Nikon Speedlights as On-Camera Master Flashes

  • SB-910
  • SB-900
  • SB-800
  • SB-700
  • SU-800 Wireless Speedlight Commander

Note: The "GN" ratio mode of the SB-700 is not supported.